Standalone louvred side panel with optional posts on either end. A single rectangular frame filled with evenly-distributed louvres (flat bar or elliptical aluminium extrusions, angled at 45 degrees). Supports horizontal or vertical louvre orientation. Suitable for fencing runs, privacy screens, or wall-mounted panels.
Configure Louvred Side Panel dimensions and download professional A4 PDF fabrication drawings with orthographic views and dimension lines. No CAD software needed. Sub-millimetre precision from a true 3D solid model.
| Parameter | Range |
|---|---|
| Clear Opening Width | 100 mm to 6,000 mm |
| Panel Height | 100 mm to 4,000 mm |
| Gap Below Panel | 0 mm to 500 mm |
| Wall Inset | 0 mm to 100 mm |
| Left Post Material | Steel (galvanised), Aluminium, Stainless steel (304/316) |
| Left Post Attachment | Concrete into Ground, Bolted to Side Wall, Footplate |
| Left Post Concrete Depth | 50 mm to 1,500 mm |
| Left Post Footplate Position | Toe In, Toe Out, Centre, Top Left, Top Centre, Top Right |
| Right Post Material | Steel (galvanised), Aluminium, Stainless steel (304/316) |
| Right Post Attachment | Concrete into Ground, Bolted to Side Wall, Footplate |
| Right Post Concrete Depth | 50 mm to 1,500 mm |
| Right Post Footplate Position | Toe In, Toe Out, Centre, Top Left, Top Centre, Top Right |
| Louvre Orientation | Horizontal, Vertical |
| Louvre Spacing | -50 mm to 200 mm |
The Louvred Side Panel accepts opening widths from 100 mm to 6,000 mm. Enter your exact site measurement and the engine recomputes all frame members, battens or slats, and dimension lines to match.
Each drawing pack is an A4 PDF with orthographic views (front elevation, side elevation, top view, and isometric), full dimension lines, extension lines, and a professional title block. You also get a live 3D preview in the browser and optional STEP file export for CAD software.
Yes. Dimensions are computed to sub-millimetre precision from a true 3D solid model, not approximated from a template. Print the PDF at actual size, hand it to your fabricator, and build from it. Change any input and the entire drawing regenerates in about 60 seconds.
Category: Fencing. Tags: side-panel, fencing, louvres, fabrication. Built with CadQuery, the same OCCT geometry kernel used in FreeCAD and professional CAD tools.
No preview yet
Configure your parameters and click Generate Drawing to see fabrication drawings here.