Hamptons-style parametric sliding gate with a horizontal cross-rail dividing a vertical-slat top region from a composite bottom region intended for U-channel cladding inserts (timber, hardies, or panel — fitted on site). Supports an independently-raked bottom rail (different height at each stile), an optional vertical gate tail below the bottom rail for V-track hardware, and an optional L-piece top rail.
Configure Hamptons-Style Sliding Gate dimensions and download professional A4 PDF fabrication drawings with orthographic views and dimension lines. No CAD software needed. Sub-millimetre precision from a true 3D solid model.
| Parameter | Range |
|---|---|
| Clear Opening Width | 1,000 mm to 12,000 mm |
| Clear Height (Left) | 600 mm to 3,000 mm |
| Clear Height (Right) | 600 mm to 3,000 mm |
| Top Rail Type | Standard, L-Piece |
| Cross Rail Offset (D) | 0 mm to 3,000 mm |
| Slat Distribution | Fixed Gap, Number of Slats |
| Slat Spacing | 1 mm to 200 mm |
| Slat Offset from Edge | 0 mm to 500 mm |
| Tail Length | 0 mm to 2,000 mm |
| Left Wheel Offset | 30 mm to 2,000 mm |
| Right Wheel Offset | 30 mm to 2,000 mm |
The Hamptons-Style Sliding Gate accepts opening widths from 1,000 mm to 12,000 mm. Enter your exact site measurement and the engine recomputes all frame members, battens or slats, and dimension lines to match.
Each drawing pack is an A4 PDF with orthographic views (front elevation, side elevation, top view, and isometric), full dimension lines, extension lines, and a professional title block. You also get a live 3D preview in the browser and optional STEP file export for CAD software.
Yes. Dimensions are computed to sub-millimetre precision from a true 3D solid model, not approximated from a template. Print the PDF at actual size, hand it to your fabricator, and build from it. Change any input and the entire drawing regenerates in about 60 seconds.
Category: Gates. Tags: gate, sliding, slats, vertical-slat, hamptons, composite, u-channel, raked, fabrication. Built with CadQuery, the same OCCT geometry kernel used in FreeCAD and professional CAD tools.
No preview yet
Configure your parameters and click Generate Drawing to see fabrication drawings here.