Parametric 2- or 3-leaf telescopic sliding gate frame. Frame-only — attach your own battens, slats, louvres, sheet, or leave open. Leaves sit on parallel tracks and telescope past each other, parking in a fraction of the opening width — ideal for driveways with limited run-off space.
Configure Standard Telescopic Gate Frame dimensions and download professional A4 PDF fabrication drawings with orthographic views and dimension lines. No CAD software needed. Sub-millimetre precision from a true 3D solid model.
| Parameter | Range |
|---|---|
| Clear Opening Width | 2,000 mm to 10,000 mm |
| Number of Leaves | 2 Leaves, 3 Leaves |
| Leaf Overlap | 40 mm to 200 mm |
| Track Gap | 20 mm to 120 mm |
| Clear Height (Left) | 800 mm to 3,000 mm |
| Clear Height (Right) | 800 mm to 3,000 mm |
| Bottom Rail Height | 50 mm to 200 mm |
| Bottom Rail Depth | 25 mm to 100 mm |
| Top Rail Type | Standard, L-Piece |
| Top Rail Height | 25 mm to 200 mm |
| Top Rail Depth | 25 mm to 200 mm |
| Extrusion Size | 50 x 50 SHS, 100 x 50 RHS, Other |
| Stile Width | 25 mm to 200 mm |
| Stile Depth | 25 mm to 200 mm |
| Frame Gauge | 1 mm to 10 mm |
| Mid Rail Orientation | Horizontal, Vertical, Diagonal |
| Diagonal Direction | Bottom Left to Top Right, Top Left to Bottom Right |
| Mid Rail Size | 40 x 40 SHS, 50 x 50 SHS, 25 x 25 SHS, 16 x 65 RHS, Other |
| Mid Rail Width | 10 mm to 200 mm |
| Mid Rail Depth | 10 mm to 200 mm |
| Wheel Diameter | 50 mm to 200 mm |
| Wheel Offset from End | 100 mm to 1,000 mm |
The Standard Telescopic Gate Frame accepts opening widths from 2,000 mm to 10,000 mm. Enter your exact site measurement and the engine recomputes all frame members, battens or slats, and dimension lines to match.
Each drawing pack is an A4 PDF with orthographic views (front elevation, side elevation, top view, and isometric), full dimension lines, extension lines, and a professional title block. You also get a live 3D preview in the browser and optional STEP file export for CAD software.
Yes. Dimensions are computed to sub-millimetre precision from a true 3D solid model, not approximated from a template. Print the PDF at actual size, hand it to your fabricator, and build from it. Change any input and the entire drawing regenerates in about 60 seconds.
Category: Gates. Tags: gate, sliding, telescopic, frame, diy, fabrication. Built with CadQuery, the same OCCT geometry kernel used in FreeCAD and professional CAD tools.
No preview yet
Configure your parameters and click Generate Drawing to see fabrication drawings here.