Standalone battened side panel with optional posts on either end. A single rectangular frame with vertical battens face-fixed to the front. Suitable for fencing runs, privacy screens, or wall-mounted panels.
Configure Battened Side Panel dimensions and download professional A4 PDF fabrication drawings with orthographic views and dimension lines. No CAD software needed. Sub-millimetre precision from a true 3D solid model.
| Parameter | Range |
|---|---|
| Panel Width | 200 mm to 6,000 mm |
| Panel Height | 600 mm to 3,000 mm |
| Gap Below Panel | 0 mm to 300 mm |
| Post Extrusion Size | 50 x 50 SHS, 65 x 65 SHS, Other |
| Post Width | 30 mm to 200 mm |
| Post Depth | 30 mm to 200 mm |
| Wall Inset | 0 mm to 100 mm |
| Left Post Attachment | Concrete into Ground, Bolted to Side Wall, Footplate |
| Left Post Concrete Depth | 50 mm to 1,500 mm |
| Left Post Footplate Position | Toe In, Toe Out, Centre, Top Left, Top Centre, Top Right |
| Right Post Attachment | Concrete into Ground, Bolted to Side Wall, Footplate |
| Right Post Concrete Depth | 50 mm to 1,500 mm |
| Right Post Footplate Position | Toe In, Toe Out, Centre, Top Left, Top Centre, Top Right |
| Frame Extrusion Profile | 40 x 40 SHS, 50 x 50 SHS, 25 x 25 SHS, Other |
| Frame Tube Width | 25 mm to 200 mm |
| Frame Tube Depth | 25 mm to 200 mm |
| Frame Gauge | 1.2 mm to 6 mm |
| Batten Size | 40 x 40 SHS, 16 x 65 RHS, 25 x 25 SHS, Other |
| Batten Width | 10 mm to 200 mm |
| Batten Depth | 10 mm to 200 mm |
| Batten Gauge | 1 mm to 6 mm |
| Batten Distribution | Fixed Gap, Number of Battens |
| Batten Spacing | 3 mm to 200 mm |
| Batten Offset from Edge | 0 mm to 500 mm |
| Batten Overhang Top | 0 mm to 500 mm |
| Batten Overhang Bottom | 0 mm to 500 mm |
Each drawing pack is an A4 PDF with orthographic views (front elevation, side elevation, top view, and isometric), full dimension lines, extension lines, and a professional title block. You also get a live 3D preview in the browser and optional STEP file export for CAD software.
Yes. Dimensions are computed to sub-millimetre precision from a true 3D solid model, not approximated from a template. Print the PDF at actual size, hand it to your fabricator, and build from it. Change any input and the entire drawing regenerates in about 60 seconds.
Category: Fencing. Tags: side-panel, fencing, battens, fabrication. Built with CadQuery, the same OCCT geometry kernel used in FreeCAD and professional CAD tools.
No preview yet
Configure your parameters and click Generate Drawing to see fabrication drawings here.